Sometimes when configuring or commissioning frequency converters or servo drives, such as the sinamics G120 / G120C / S120, things go wrong. Here below a summarized list of ideas to help troubleshooting :
> Assign Profinet name and IP address to the device
> Upgrade to the latest firmware version available for the drive. Notes: #1 Important is to have available a suitable 2GB memory card for this operation #2 Downgrade firmware may be required to reset certain parameters in case of issue or troubleshooting
> It is helpful to know well both software Startdrive (within TIA Portal) and Starter to configure and troubleshoot the drive. Each of them has its pros and cons.
> Safety Commissioning: useful for hardwired Safety Function or networked Safety Function with PROFIsafe, such as Safe-Torque Off (STO) > Ensure the drive is Online > Ensure the configuration is copied from RAM to ROM when the Safety Commissioning has ended > Power cycle the drive > When using Starter (external to TIA Portal) the Safety Commissioning can be done and afterwards uploaded in TIA Portal and connected to the rest of the project
Additional resources:
> Link to recorded Webinars from Siemens Brazil (Check out the Drive section)
> Link to Siemens Technical Service Support
> Link to Siemens Technical Service Support BR
> Link to G120C compact operating instructions
> Link to EMC installation guidelines
> Link to detailed G120C parameters list
> Link to Fieldbus manual (Profinet and others)
> Link to Procedure to erase the parameterization, the safety parameterization und the Webserver passwords (for Sinamics S210)
> Link to download the Firmware files
> Link to Safety Integrated manual
> Link to the Operating Instructions of the drive
> Link Acyclic functions (Encoder Adjustment)
> Link to Web License Manager (Safety Extended Functions, EPos)
No comments:
Post a Comment